You
may specify new TCP/IP settings (IPv4) for this printer. You should consult with your Network Administrator before
changing any settings.
Note: The installation utility will detect your
system settings and will provide recommended TCP/IP settings (both IPv4 and
IPv6), but you can modify the IPv4 settings if desired (this utility can only
be used to manually configure IPv4 settings). Parameter values that you assign
are not configured on the printer until you have finished the installation.
·
If the printer does not have valid TCP/IP settings:
Enter a valid IP address (IPv4) for the printer, a valid subnet mask, and a
valid IP address for the gateway into the fields provided. You should consult
with your Network Administrator before assigning values.
Click
Suggest Settings to have TCP/IP parameters automatically entered by the
installation utility.
Use
the default port name checkbox (Windows NT, 2000 and XP). Check this box to use
the default port settings for your printer. If this box is not checked, the Port
Name dialog will be the next wizard screen.
CAUTION:
If your printer will
be connected to other networks, TCP/IP settings suggested by the utility might
not be globally unique and may conflict with other devices. Use caution when
connecting to other TCP/IP networks.
·
If the printer already has valid TCP/IP settings:
The current TCP/IP settings will be displayed.
CAUTION:
Changing valid
TCP/IP settings can prevent access by other users. Consult with your Network
Administrator before changing valid settings.
Note:
If TCP/IP parameters
are password protected by management software, such as HP Web Jetadmin, the
entry fields will be grayed out.
Use
default port name checkbox (Windows NT, 2000 and XP only). Check this box to
use the default port settings for your printer. If this box is not checked, the
Port Name dialog will be the next wizard screen.