September 2020
This file contains important information about NI Vision Builder for Automated Inspection (Vision Builder AI), including installation instructions, new features, and known issues.
Product Security and Critical Updates
Automating the Installation of NI Products
Software Requirements for Migrating an Inspection to LabVIEW
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
PC-Based Image Acquisition and I/O Support
NI Vision Builder AI helps you to configure, benchmark, and deploy a system that addresses vision applications from pattern matching to code reading and presence detection to precision alignment and classification.
For information about licensing NI Vision software, visit ni.com/info and enter the Info Code LicenseVision. Refer to the NI Vision website at ni.com/vision for the latest information about NI Vision Builder AI.
NI Vision Builder AI 2020 has the following requirements:
| Minimum | Recommended | |
|---|---|---|
| Processor | Pentium 4/M or equivalent | Core Duo or equivalent |
| Memory | 512 MB RAM | 1 GB RAM |
| Display | 1,024 × 768 resolution video adapter with a 24- or 32-bit display | 1,280 × 1,024 resolution video adapter with a 24- or 32-bit display |
| Operating System |
|
|
| Browser | Microsoft Internet Explorer 6.0 or later | |
| Hard Disk Space | 7.7 GB | 8.3 GB |
Refer to the LabVIEW Readme for additional system requirements and supported operating systems for LabVIEW.
For more information about the changes to our OS support for 2016, refer to KB 79UC78LS, Why Does my LabVIEW, LabWindows/CVI, Measurement Studio, or TestStand Built Installer Fail on Windows XP/Vista and Server 2003?.
Note Support for Windows 32-bit operating systems may require disabling physical address extension (PAE). To learn how this might affect your system and what actions you might need to take, visit ni.com/info and enter the Info Code PAESupport.
1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.
2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.
3Only supported as pre-installed on NI hardware.
NI Vision Builder AI 2020 supports the following application software versions, including service packs.
| Application Software | Versions Supported by NI Vision Builder AI 2020 |
|---|---|
| LabVIEW | 2017, 2018, 2019, 20201 |
| LabWindows™/CVI™ | 2015, 2017, 2019 |
| TestStand | 2014, 2016, 2017, 2019 |
1 Required when using the NI Vision Builder AI Development Toolkit.
Note: The Vision Builder AI API for .NET is now available as an open source on github at https://github.com/ni/vbai-dotnet.
Complete the following steps to install Vision Builder AI:
Note: You must be logged in with administrator privileges to install Vision Builder AI.
If you do not activate a valid license, Vision Builder AI runs in evaluation mode and continues to prompt you to activate a license on each launch. At the end of the evaluation period you must activate a Vision Builder AI license to continue using the product.
Note: While Vision Builder AI is in Evaluation mode, all features are available except Migrate Inspection to LabVIEW.
Complete the following steps to activate the Vision Builder AI license:
Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.
The following list describes the new features in Vision Builder AI 2020:
Vision Builder AI 2020 is fully supported on LabVIEW 2020.
You can use Vision Builder AI to configure and control the following Windows-based NI devices:
You can use Vision Builder AI to remotely configure and control a supported remote target running NI Linux Real-Time. Vision Builder AI supports the following remote targets:
To use Vision Builder AI with a remote target, you must use Vision Builder AI to configure the remote target. For more information about using Vision Builder AI to configure the remote target, refer to the documentation included with the remote target or the NI Vision Builder for Automated Inspection: Configuration Help.
Note: NI recommends using WebDAV to transfer files to and from a real-time target. For more information on using WebDAV to transfer files to and from a remote target, go to ni.com/info and enter the Info Code WebDAVTransfer.
The following table illustrates when a remote target requires you to install driver software on the development computer.
| Remote Target or Camera Connected to a Remote Target |
Requires Driver Software Installed on Development Computer |
|---|---|
| NI Smart Camera | No |
| IEEE 1394 | No |
| GigE Vision | No |
The following table illustrates which USB NI CompactDAQ chassis are supported by remote Vision Builder AI targets.
| Remote Target | Supported USB NI CompactDAQ chassis |
|---|---|
| NI ISC-178x Smart Camera |
|
| NI CVS-1458 and NI CVS-1459 Compact Vision System | |
| NI IC-312x Industrial Controller | |
| NI IC-317x Industrial Controller |
You can access the software and documentation known issues list online. Refer to the NI website for an up-to-date list of known issues in NI Vision Builder AI 2020.
Refer to the NI website for an up-to-date list of all bug fixes in this release.
See Additional Resources.
See Additional Resources.
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
To migrate an inspection to LabVIEW, Vision Builder AI 2020 requires LabVIEW 2020 or later and NI Vision Development Module 2020 or later.
Some Vision Builder AI steps require additional software to successfully migrate an inspection to LabVIEW.
Refer to the following table for software requirements to migrate specific steps. Driver versions must support the target version of LabVIEW for migration.
| Step Name | Requirement |
|---|---|
| Acquire Image | NI-IMAQ |
| Acquire Image (IEEE 1394, GigE, or USB) | NI-IMAQdx |
| Acquire Image (Smart Camera) | NI-IMAQdx |
| Generate Pulse | NI-IMAQ |
| Generate Pulse (Vision RIO) | NI-IMAQ I/O for PCIe-8237R and PCIe-825xR boards, and Compact Vision Systems NI Industrial Controller Device Drivers for industrial controllers |
| Read/Write I/O | NI-IMAQ |
| Read/Write I/O (NI-DAQmx) | NI-DAQmx |
| Read/Write I/O (Vision RIO) | NI-IMAQ I/O for PCIe-8237R and PCIe-825xR boards, and Compact Vision Systems NI Industrial Controller Device Drivers for industrial controllers |
Note: NI-IMAQ, NI-IMAQdx, and NI-IMAQ I/O are available on the NI Vision Acquisition Software DVD included with Vision Builder AI. The NI Industrial Controller Device Drivers DVD is provided separately with industrial controller devices. To download NI-DAQmx, visit ni.com/downloads/products/.
The Run LabVIEW VI step in Vision Builder AI 2020 supports VIs saved in LabVIEW 2020 or earlier.
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.
Vision Builder AI supports the following types of image acquisition and I/O devices:
Note: You must install driver software to acquire images from an image acquisition device connected to the development computer.
This version of Vision Builder AI supports NI image acquisition devices that require NI-IMAQ driver version 4.6.4 or later. Specific devices may require later versions.
Note: If you are using an image acquisition device, you must install NI Vision Acquisition Software before you install the image acquisition device. NI Vision Acquisition Software gives you access to Measurement & Automation Explorer (MAX), which is software you can use to configure NI devices.
This version of Vision Builder AI supports IEEE 1394 cameras, GigE Vision cameras, USB3 Vision, DirectShow-compatible USB cameras, and requires NI-IMAQdx driver version 3.3 or later. Specific devices may require later versions.
To acquire an image from one of these camera types when the camera is connected to the host computer, use the Acquire Image (1394, GigE, or USB) step. The Acquire Image (1394, GigE, or USB) step requires NI-IMAQdx, which can be installed from the NI Vision Acquisition Software DVD included with Vision Builder AI.
You must configure an IEEE 1394 camera to use the NI-IMAQdx driver. Complete the following steps to use MAX to configure an IEEE 1394 camera to use the NI-IMAQdx driver.
This version of Vision Builder AI supports digital and analog I/O from any NI data acquisition (DAQ) device using NI-DAQmx Global Virtual Channels. To support NI DAQ devices, Vision Builder AI requires NI-DAQmx 8.0 or later.
To support serial communication, Vision Builder AI requires NI-VISA 2.6.0 or later, which is included with Vision Builder AI. You can use the serial ports built into the PC or one of the following NI serial interfaces: NI PCI-232/x, NI PXI-8420/x, or NI PXI-8422/x. You do not need to install NI-VISA on the PC to use the serial port on a remote target.
Pursuant to the National Instruments Software License Agreement, Vision Builder AI software is licensed to run on only one machine. Deployed applications that use Vision Builder AI require that Vision Builder AI be installed and licensed on each host machine. Therefore, you must purchase a separate Vision Builder AI license for each host machine. For more information, refer to the enclosed National Instruments Software License Agreement or visit ni.com/legal/license.
For information about licensing NI Vision software, visit ni.com/info and enter the Info Code LicenseVision. Vision Builder AI offers the following licensing options:
If you are using the Windows Firewall and launch Vision Builder AI, a dialog box may prompt you to allow Vision Builder AI to receive information over the network. Select Allow access so that Vision Builder AI can communicate with your remote target.
Read the NI Vision Builder for Automated Inspection Tutorial, which provides exercises for learning how to perform basic machine vision techniques using Vision Builder AI.
Reference information for Vision Builder AI can be accessed through the following methods:
The following documents are provided with Vision Builder AI as online help:
Use the Search tab in the help files to quickly locate specific information. For information about how to use the search functionality, refer to the Using Help»Searching Help topic in the help file.
The following documents are provided with Vision Builder AI as Adobe PDF documents:
Access examples of common Vision Builder AI inspections by selecting Start»All Programs»National Instruments»Vision Builder AI 2020»Vision Builder AI 2020 Examples on your PC.
Visit ni.com/vision and the NI Developer Zone at ni.com/zone for the most up-to-date information about Vision Builder AI.
The NIEXTCCOMPILERSUPP environment variable is provided as an alias to the location of C language support files. You can use this variable when compiling and linking an application. The Application Interface files (header and library files to include in applications) are placed in a centralized location to prevent users from accidentally overwriting them and to provide this NIEXTCCOMPILERSUPP environment variable.
Note: $(NIEXTCCOMPILERSUPP) is configured as an environment variable on the target system. The variable evaluates by default to \Program Files\National Instruments\shared\ExternalCompilerSupport\C on a 32-bit system.
| Item | Installed Location |
| header files | <$(NIEXTCCOMPILERSUPP)>\include |
| 32-bit MSVC import libraries | <$(NIEXTCCOMPILERSUPP)>\lib32\msvc |
| 64-bit MSVC import libraries | <$(NIEXTCCOMPILERSUPP)>\lib64\msvc |
Copyright
©2002-2020 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
375131G-01